FAR Calculation in Delhi NCR/Gurgaon | FAR Calculator in Delhi/Gurgaon
FAR Calculator for plot in Gurgaon
FAR Calculation in Delhi NCR/Gurgaon
Floor Area Ratio (Far) Calculation For Plot in Gurgaon as Per Local Building Bye Laws
Step 1: Check the Floor area ratio (FAR) for your plot in Gurgaon from the table below. If you have the plot size in sq. yards then make sure to convert it to sq. meter by multiplying it by 0.84 ( in 1 sq.yard = 0.83612736 sq.meter. Now we take only 2 precision so 1 sq.yard = .84 sq. meter). The table shown below is only applicable for plots in Gurgaon.
FAR Calculation in Delhi NCR
Area of Gurgaon Plot (sq. meter) |
Permissible Ground Coverage % |
Real FAR | Purchasable FAR | Total |
---|---|---|---|---|
1-75 | 66 | 165 | 33 | 198 |
76-100 | 66 | 165 | 33 | 198 |
101-150 | 66 | 145 | 53 | 198 |
151-200 | 66 | 145 | 53 | 198 |
201-250 | 66 | 145 | 53 | 198 |
251-350 | 60 | 125 | 55 | 180 |
351-500 | 60 | 120 | 60 | 180 |
501 and Above | 60 | 100 | 80 | 180 |
Know About Best FAR Calculator in Delhi, Gurgaon
Floor area ratio (FAR)” mean a quotient obtained by dividing the multiple of the total covered area of all floors and hundred, by the area of plot i.e.
FAR Calculator In Delhi NCR
Total covered area X 100
FAR = _______________________________
Plot Area
For the purpose of calculating FAR, Cantilevered, Permitted roof projections, Lift room, Mumty, Balcony, Basement or any floor if used for parking, services and storage, stilt area (unenclosed) proposed to be used for parking/ pedestrian plaza only, open staircase (without mumty), terrace with or without access, fire staircase, atrium, water tank, the open courtyard of permitted size shall not be counted towards FAR:
Provided, the area under shaft, chutes, lift well and staircase from stilt to next floor shall be counted towards FAR only at once on the ground floor.
Provided in case the ventilation shaft area is more than 3 square meters, it shall not be counted in FAR.
Step 2: To take an example, say, your plot size is 250 sq. yards. Convert 250 sq. yards to sq. meters by multiplying it by 0.84. After conversion 250 sq. yards comes out to be 210 sq. meters.
For a 210 sq. meters plot in Gurgaon, the Real FAR is 145 and the Total FAR after considering the purchasable FAR is 198 (as checked from the table).
FAR Calculator in Delhi NCR
Total covered area X 100
FAR = _______________________________
Plot Area
The total area of all floors a 250 sq. yards plot in Gurgaon |
= (250*9*1.98) = 4455 sq.ft. |
(Factor of 9 has been used to convert plot size from sq. yards to sq. ft.) |
Step 3: 4455 sq.ft is full FAR of 250 sq.yard plot Haryana building code 2017 allow you to build 4 independent floor including stilt parking. If you desire to build all 4 floors then your FAR is 4455/4=1114 sq.ft on each floor. This means you can only build 1114 sq.ft maximum on each floor. FAR Calculation in Gurgaon.